Hastings Catalog

CARE AND MAINTENANCE FIBERGLASS CLEANING AND REFINISHING KIT • Kit includes items necessary to clean and/or restore fiberglass hot sticks, booms, and buckets • Kit consists of... • All Purpose Cleaner - The all purpose cleaner provides a safe non-toxic liquid to aid in re - moving dirt, grease, metal oxides and other contaminants which accumulate on fiberglass • Ultra Fine Non-Metalic Abrasive Pads - Pads can be used with the all purpose cleaner to remove stubborn contamination. Note - fiberglass wax may be required after use of cleaner and/or pads to retain surface gloss. • Clear Epoxy Refinishing Kit - The two part refinish kit is used to bring the tool surface back to its original finish if normal cleaning is not sufficient • Synthetic Treated Wiping Cloths - Wiping cloths are used to remove light dust and dirt from stick surfaces. It is also needed after light cleaning of tool with all purpose cleaner to allow moisture to bead up on tool. CAT NO DESCRIPTION LBS 10-171 COMPLETE CLEANING KIT 11.0 10-169 1 GALLON ALL PURPOSE CLEANER 8.0 10-170 BOX OF 20 ULTRA FINE NON METALIC PADS 0.5 10-100 1 QUART (TWO PARTS) CLEAR EPOXY REFINISH KIT 2.0 10-090 SYNTHETIC TREATED WIPING CLOTH 0.1 EPOXY REFINISH KIT • Kit provides all the necessary materials with complete instructions for restoring, fiberglass hot line tools and aerial lift booms and buckets equal to their original finish • The epoxy coating provides a hard, tough, moisture resistant high-gloss finish of high dielectric strength and is easily cleaned • Included in the kit are complete instructions, sandpaper, paint brush, and epoxy solvent • One quart of epoxy coating covers approximately 32 square feet of surface • The coating is a two-part system, available in both white and clear, dries dust free in approxi - mately 1 1/2 hours and cures completely within 24 hours CAT NO DESCRIPTION LBS 10-100 EPOXY REFINISHING KIT - CLEAR 1 PINT EACH COMPONENT A, B, AND THINNER 4.0 10-110 EPOXY REFINISHING KIT - CLEAR 2 QUARTS EACH COMPONENT A & B AND 1 QUART THINNER 10.0 10-101 EPOXY REFINISHING KIT - WHITE 1 PINT EACH COMPONENT A, B, AND THINNER 4.0 10-111 EPOXY REFINISHING KIT - WHITE 2 QUARTS EACH COMPONENT A & B AND 1 QUART THINNER 10.0 A30108 EPOXY THINNER - 1 PINT 1.0 A30109 EPOXY THINNER - 1 QUART 2.0 Phone: 269.945.9541 • Fax: 269.945.4623 • www.hfgp.com • Email: hastings@hfgp.com PO Box 218, 1301 W Green Street, Hastings, Michigan 49058-0218 These products are for trained professionals only. 03/22 901 10-171 10-100

RkJQdWJsaXNoZXIy MTkwMTQ=