FIBERGLASS EXTENSION ARM • The Fiberglass Extension Arm is designed for use as a temporary aid in replacing existing conductors and insulators, or as an aid for moving out conductors to obtain working clearance in congested areas • Easy to install conductor holders are adjustable • Eye bolts are silicon bronze to prevent seizing and rubber grommets for use on all poles • 2 sizes of hanger brackets to accomodate multiple size cross arms • Load limit 340 lbs. per conductor holder • Rating 15KV without insulator and 34.5KV with insulator 2 1/2” DIAMETER FIBERGLASS EXTENSION ARM FOR DISTRIBUTION CROSS ARMS SMALL BRACKET FITS MAXIMUM CROSS ARM SIZE 4 1/4” WIDE X 6 3/8” TALL LARGE BRACKET FITS MAXIMUM CROSS ARM SIZE 6 1/4” WIDE X 8 1/8” TALL MINIMUM 3 1/2” WIDTH CROSS ARM CAT NO DESCRIPTION LBS 5000-H 5’ARM WITH ONE CONDUCTOR HOLDER 11.3 5001-H 5’ARM WITH ONE CONDUCTOR HOLDER AND INSULATOR 11.5 5006-H 6’ ARM WITH TWO CONDUCTOR HOLDERS 14.5 5007-H 6’ ARM WITH TWO CONDUCTOR HOLDERS AND INSULATORS 15.5 EXTENSION ARM ACCESSORIES FOR ALL 2 1/2” O.D. ARMS CAT NO DESCRIPTION LBS A10001 CONDUCTOR HOLDER ONLY 2.3 A10002 CONDUCTOR HOLDER AND INSULATOR 2.5 A30008 INSULATOR FOR USE WITH A10001 AND A10038 CONDUCTOR HOLDERS 1.0 A10038 LARGE CONDUCTOR HOLDER HAS 2 5/8” OPENING 2.8 A10039 LARGE CONDUCTOR HOLDER AND INSULATOR 3.8 P10024 EYE SCREW REPLACEMENT CONDUCTOR AND PERSONNEL SUPPORTS Phone: 269.945.9541 • Fax: 269.945.4623 • www.hfgp.com • Email: hastings@hfgp.com PO Box 218, 1301 W Green Street, Hastings, Michigan 49058-0218 These products are for trained professionals only. 06/25 308 A10001 A10002 A30008 A10038 A10039 5007-H
RkJQdWJsaXNoZXIy MTkwMTQ=