MULTI-PURPOSE HOLDING TOOL For holding slack conductors during sleeving. Provides positive control for shaping and bending jumpers and controlling conductors when cutting. FEATURES AND BENEFITS: • Excellent means of applying factory formed tie wires, armor rods, and securing captured hardware during crimping operation • Main fiberglass portion is 1” diameter • The 5/8” operating rod is designed to withstand high torque values • Foam filled to completely eliminate migration of contaminates and moisture RIGID HEAD CAT NO LENGTH CONDUCTOR CAPACITY LBS CASE 4600 4’ #6 to 1 1/16” 3.3 C-8104 4601 6’ #6 to 1 1/16” 3.8 C-8106 4602 8’ #6 to 1 1/16” 4.3 C-8108 ADJUSTABLE HEAD CAT NO LENGTH CONDUCTOR CAPACITY LBS CASE 4603 4’ #6 to 1 1/16” 4.0 C-8104 4604 6’ #6 to 1 1/16” 4.5 C-8106 4605 8’ #6 to 1 1/16” 5.0 C-8108 ADJUSTABLE HEAD All of the same features of the rigid head plus the convenience of adjustment from straight to 30 degrees both sides of center. This gives the lineman better control options from multiple positions. A universal joint on the operating rod allows smooth, effortless control of the gripping pressure. Angle adjustments are obtained easily by means of a spring loaded thumb screw. HOT STICKS AND CUTTERS Phone: 269.945.9541 • Fax: 269.945.4623 • www.hfgp.com • Email: hastings@hfgp.com PO Box 218, 1301 W Green Street, Hastings, Michigan 49058-0218 These products are for trained professionals only. 07/18 4604 112
RkJQdWJsaXNoZXIy MTkwMTQ=